Accessories
Detectors 
MR360R Receiver
The MR360R offers accurate grade information for all visual machine control applications. Large 360 ° detection windows pick up any rotating laser, from any angle.
Built-in vertical indicator monitors angle of the stick, signaling if it's plumb or under- or over-extended. Saves money by reducing over- or under-cuts. For optimal use of vertical indicator, the remote display with direction arrows for plumbing up the dipper stick is required.
Five LED indicators show the position of the bucket in relation to the laser beam. Arrows indicate if beam is high or low, allowing you to quickly reach reference plane. Magnet mount allows quick setup and easy movement from machine to machine. Clamp mount also available.
This in-cab display has a clear panel that mounts to cab windshield, and won't block operator's view. Uses wireless RF link to receiver (no cable needed). An in-cab display allows the operator to view the five channel indicators, vertical indicator arrows, and the ditch and bucket in the same view. Includes heavy-duty suction cup mount and power cord with accessory plug.
|
MR360R |
Range* |
650 ft. (200 m) diameter |
Accuracy* |
Fine: ± 7/16” to 11/16” (± .42”-.67”; 12 mm-17 mm) |
Capture height |
9.75” (25 cm) |
Reception angle |
360° |
Vertical indicator |
± 5 ° |
Battery life |
25-30 hrs./NiMh rechargeable |
Charging time |
12 hours |
Environmental |
Waterproof (IP67) |
Weight |
4 lbs. (1.8 kg) |
| Dimensions | 14.75” x 3” x 4.25” (37.5 x 7.5 x 11 cm) without mount |
MR240 Receiver
The MR240 is ideal for use with backhoes and mini-excavators, offering accurate grade information for visual machine-control applications. The receiver attaches to the excavator arm with extra strong magnets, and is easy to adjust to the correct height with the release lever. It offers 230 ° detection of any rotating laser. In fine mode, it has 5 channels (LED indicators) showing bucket position.
|
MR240 |
Range* |
650 ft. (200 m) |
Accuracy* |
Fine: ¼” – 3/8” (6-10 mm) |
Capture height |
5” (15 cm) |
Reception angle |
230° |
Battery life |
180 hours (3 AA alkaline) |
Type of attachment |
Magnets |
Automatic shutoff |
After 1 hr. |
Environmental |
Waterproof (IP67) |
| Dimensions | 8.5” x 5” x 4” (22 x 12 x 10 cm); 4.8 lbs. (2.2 kg) |
Tripods
KOMBO tripod/rod
This unique kit combines an aluminum tripod and quick-attach grade rod in one easy-to-carry package. The leveling rod securely clips to the tripod leg, allowing you to carry the system in one hand. Kombo kit includes a sturdy carrying bag, keeping the system clean and scuff-free during transport. Can be used with any laser or optical level. Rods available in inches, 10ths, or metric.
>
Leaflet in PDF…
Elevation :
Use the elevating column to quickly adjust the height of the laser.
117SK4 : 11 ft. (3,40 m)
117SKX : 6 ft. (1,75 m)
Available with rubber feet for interior use or pointed feet for outdoor use.
Standard :
Agatec lasers can be mounted on a 5/8 - 11 dome or flat head tripod.
EQ9000
Supports 
Adjustable grade mount is used to lay out inclined planes, such as cathedral ceilings, stairs...
Glasses 